The peristaltic pump consists of two main parts: an outer tube and an inner tube and a rotor.The tube is usually made from rubber, or silicon，plastic. The rotor is usually made from plastic or metal. The outer tube has many small holes along its length, while the inner tube has one large hole at its end. When water enters the pump through the inlet port, it travels down the outer tube and into the inner tube. As the water passes through the holes in the outer tube, it pushes against the walls of the inner tube, forcing the water out through the outlet port. This process continues until the entire volume of water has been pumped.
Advantages of Maxclever Peristaltic Pumps
1. Small size and high precision and good stability
2. No cross-contamination, the liquid only contacts the pump tube during work
3. Simple and durable, the micro peristaltic pump has a simple structure, low self-failure rate,
4. Wide range of application - suitable for use in a variety of industries and laboratories.
5. Good sealing performance,Good self-priming performance ,Prevent backflow
MPP50 Peristaltic Pump
| Rated voltage |
DC3V 6V 12V |
| Rated current |
<100mA |
| Power |
1W |
| Air nozzle |
φ3.0mm |
| water flow |
40~100ml/min |
| noise |
<60dB |
| weight |
40g |
| life |
>300H ON15S OFF5S |
| water pressure |
>15psi |
