MPA 1001 Diaphragm Vacuum Pump

MPA 1001 Diaphragm Vacuum Pump

The 1001 diaphragm vacuum pump developed by our company is a diaphragm negative pressure pump with a small size and compact size. The suction port connected to it can achieve the function of pumping or vacuuming. It can be used to transmit general corrosive gases and high-humidity gases without polluting the transported medium. . The main structure of the 1001 diaphragm vacuum pump: power unit, transmission device, and air extraction device.

The working principle of the 1001 diaphragm vacuum pump: powered by the motor, the end of the rubber sleeve is driven to reciprocate through the transmission device, forming a vacuum in the closed chamber formed by the rubber sleeve and the air cylinder, so that the working medium can be sucked in from the air inlet and discharged from the air outlet.

The parameters of the 1001 diaphragm vacuum pump produced by our company: flow rate 2-3L/min, intake negative pressure 17-18KPa.